- EU 868 band
£370.00 VAT excluded
- EU 868
LORIX One is a high-quality, Swiss-made, outdoor LoRaWAN gateway. Featuring PoE and supplied with an outdoor antenna, it's a ready to go LoRa gateway designed for fast and easy installation.
We're delighted to be the UK distributor for LORIX One, a small but powerful outdoor gateway. Though it's low-cost for an IP65-rated outdoor gateway, LORIX One is built with the quality you'd expect from a Swiss-made device.
LORIX One is supplied with everything you need to get up and running, including a 4.15dBi outdoor antenna that attaches to the N-connector on top of the gateway. The kit also includes a passive Power-over-Ethernet injector, so only one cable needs to be run out to the gateway.
The unit is designed for quick mounting on a pole, it's straightforward to install on an antenna pole, or suitable section of scaffolding or handrail. The gateway is powered over Ethernet using the supplied passive PoE injector. Simply run cat 5/6 cable out to the gateway, pass it through the end cap and crimp on a connector, your wiring is complete!
The LORIX One gateway can be configured for any network server via SSH or the USB serial console. By default the LORIX is configured for Loriot, but can be easily configured to use the Semtech packet forwarder standard which is supported by The Things Network and most other LoRaWAN network servers.
The instructions (from the Attachments tab above) are excellent and guide you through the process. Some additional information is here:
The gateway features a command line interface to configure your LoRaWAN and network settings. We can also pre-configure the gateway for you as part of our simple set up service. If you buy your gateway using this option we'll get in touch to get the networking details from you and configure your unit before we ship it to you.
We can pre-configure the device to connect to the Things Network, or any other LoRaWAN network, as soon as you take it out of the box!